How much is a psd rifle

SAAMI accepted the new cartridge and some other manufacturers got on board with manufacturing. The finalized 6. It was found with the fully optimized ammunition, it was not safe to load it in the original Spec 1 chamber.

The primary load was a gr Sierra open tip match projectile at a velocity of around 2, feet per second. Loads available are from 77 to grains in weight. Others went ahead and upgraded to the Spec 2. Ammunition manufacturers did not really want to make a cartridge that would not be safe in some guns that were out there so they mostly stayed with the SAAMI Spec 1 chamber. They could be sure that their ammunition would be safe to shoot in all existing rifles.

One company did take on the Spec 2 load and that was Silver State Armory. It would be safe to say that Silver State Armory has done more product development of 6. Their Spec 2 chamber ammo is specifically marked. The path of the 6. USSOCOM looked at it and they were less than thrilled, more than likely not due to its performance capabilities but due to ammunition compatibility. This would also be the introduction of a non-NATO standardized cartridge. Feeding was an issue. The cartridge did get a following in the commercial market.

Several companies manufacture rifles in this caliber. The cartridge is ideal for medium game hunting and is quite popular for deer and hog. Few ammunition companies really took it on. Of course Remington offers a good line of ammo. As previously stated Silver State Armory specializes in the 6. Of all the manufacturers of modern military arms, LWRCI has come to be best known for producing military grade rifles chambered in the 6.

The company is known for producing rifles with their proprietary short stroke tapped piston 2that adapted a 6. In an industry that had pretty much given up on the caliber, LWRCI always believed in its potential and continued to improve their rifles.

LWRCI is also in the international market and sells arms throughout the world. Of course their primary sales are all 5. Due to contractual agreements they are not at liberty to divulge the name of this unit. This group was looking for a short barreled rifle that packed a heavy punch. LWRCI looked at their requirements and though that this would be ideal for the 6.

It was the same size for the most part as a short 5. The customer was quite interested. LWRCI imported some of their 6. With that kind of number they decided to make a real bold move. They understood the potential feeding issues and the sandy environment could complicate things, so they decided to team up with Magpul and create a proper magazine that would be optimized for the 6.

Logically this means the magazine well must be made wider, which they did. With the stock extended the overall length is The weight of the rifle without a magazine is 6. The barrel is 8. The rifle is selective-fire Semi- and fully-automatic and magazine fed. The rifle is fully ambidextrous with ambi selector, magazine release and bolt catch. Without suppressor the cyclic rate is roughly rounds per minute and with suppressor roughly 1, rounds per minute.

Before we delve into the specific features of the rifle there is one very important component to this particular weapon system, the ammunition. Due to the short 8. In normal 6. This means the 8. Also the current ammunition is commercial grade, lacking the flash inhibitors in the powder of military grade ammunition. Basically a propellant that was faster burning that would get the port pressures back up to where they would need to be to cycle the rifle reliably.

The rifle would only function properly with the specified load. All commercial off the shelf ammunition caused the rifle to short stroke. The load used is called XM68GD. The projectile is a 90 grain Speer Gold Dot projectile with an approximate muzzle velocity of feet per second and with a muzzle energy of Impressively, the maximum range of the rifle is meters at a point target.

The Six8-UCIW which is the current commercial off the shelf rifle will work with standard ammunition. Modifications have been made to the gas system for it to run reliably. All other features are the same. Starting with the lower receiver assembly, the rifle is equipped with the LWRCI produced short stock.

There are 4 positions. There are two quick-detach mount sockets on the stock, one on each side. The buffer and spring are designed specifically for the 6. The lower receiver itself is proprietary and not compatible with industry standard receivers. It is manufactured from a T-6 aircraft grade aluminum forging.

The receiver is hard coat anodized as per Mil-Spec to a flat black color. Primary difference is as we mentioned, the magazine. It holds a full 30 rounds and has high visibility orange magazine follower and lock plate. The geometry of the magazine is optimal for this cartridge. So the magazine is wider than the standard magazine. Therefore the receiver is wider. The lever is easy to grab and manipulate even with gloves. The pistol grip is the very comfortable Magpul MOE.

The lower receiver is fully ambidextrous. On the right side, right above the trigger is the ambi bolt catch. It looks the same as the one on the left side and is actuated in the same manner.

The magazine catch is in the normal location on the right side of the receiver. On the left side the ambi mag catch is located right behind the catch and is easily manipulated by either a left or right handed shooter.

The hammer, trigger, disconnector and automatic sear are all nickel boron coated. The trigger pull is the Mil-Spec 5. It has the traditional forward bolt assist, fired cartridge case deflector and ejection port.

The handguards have quad Mil-Std rails. The bottom handguard is held on by a collet over the barrel nut. The top handguard is removed for maintenance of the gas system by two pusher screws.

The locking nut itself is non-indexing. The barrel nut is self-locating and guides the operating rod through the upper receiver. The 8. Our barrel system incorporates a simple barrel change procedure that does not require tools or expertise. Barrel change takes less than one minute. Fully Integrated optic mounting platform suitable for various types of reflex sights including Trijicon, Doctor, Vortex, Bushnell and others.

It is designed to give the shooter a larger view of the target area and to automatically align with the front sight. This sight is very effective for long range target shooting and hunting. The main sight is adjustable for windage and the front sight is pre adjusted for elevation. A Three-Point Target Sight is adjustable for windage and the front sight is pre adjusted for elevation. Proprietary design that is supplied standard with the pistol, it is designed to allow the shooter very rapid acquisition of the target at shorter distances due to the wide open ring, while maintaining the ability to shoot very accurately at longer ranges due to the unique triangular front sight that automatically aligns in the center of the ring and eyesight of the shooter.

The main sight is adjustable for windage, and the front sight is pre adjusted for elevation. Proprietary recoil attenuating system.

Proprietary multi-calibre magazine allows the use of 3 calibres, 7. Textured, ergonomic frame provides a secure and comfortable grip. Integrated optics mounting platform compatible with most leading brands.