How do revenge trucks work

Offering the most turning abilities and smoothness, these trucks rarely last long on the shelves from high demand. In addition to trucks, the company also has a line of pre-built boards. When it comes to skating, Revenge knows how to make high performance gear that gets the job done. Revenge products are designed and built by passionate skateboarders. Get ready to take your riding to new heights! Skateboard Decks Specs Deck width: 7. Skateboard Completes Specs Deck width: 7. Micro Decks Specs Deck width: 6.

Mini Decks Specs Deck width: 7. Mid Decks Specs Deck width: 7. Micro Completes Specs Deck width: 6. Mini Completes Specs Deck width: 7. Mid Completes Specs Deck width: 7. No need to worry. Avoid uneven lines and unwanted air bubbles by letting our professionals grip your new deck for you. This service includes: Professionally gripping the skateboard deck. Insuring no bubbles and a nice clean cut around the edge.

Pressing 8 skateboard bearings into 4 wheels. Each bearing will be seated with a professional bearing press and will include bearing spacers when necessary.

Assembly of skateboard trucks and wheels. Both truck assemblies will have wheels installed with proper speed washers and torqued to the appropriate tolerance. Installing both truck assemblies to the gripped deck and assuring proper torque tolerance on all hardware. An autographed Warehouse Skateboards hang tag from your builder. Skateboard hardware is used to connect the skateboard trucks to the skateboard deck.

Skateboard hardware refers to the bolts and locknuts used when building a board. The bolts can have an Allen or Phillips head.

Skateboard hardware comes in many different lengths, and often includes one different colored bolt so that the rider can mark the nose of their board. Each skateboard hardware set includes 8 bolts and 8 locknuts needed to assemble one skateboard. What size hardware do I need to put together my skateboard? For additional info visit our Skateboard Trucks Buying Guide.

In general, a mid-sized truck works well for most skateboarders, but high or low trucks may be preferred for different styles of skaters. LO - Provides extra stability for flip tricks, designed for small wheels mm wheel size recommended.

MID - Good all-around profile for street or park mm wheel size recommended. The hanger is the truck's T-shaped aluminum alloy grind area. It makes direct contact with rails and curbs. The hanger holds the axle on which the wheels are mounted. Hangers weigh about oz, with lighter ones available. For additional info visit our Skateboard Buying Guide. The average width of a skateboard deck is 7.

Width is influenced by the size of the rider and the type of riding. Bigger riders and those skating ramps typically prefer a wider deck. Street skaters usually choose a smaller deck. Choose your skateboard deck according to the width, not length. Here are some general guidelines:. Size 3 shoes or smaller. MINI - Deck width: 7. Size shoes. MID - Deck width: 7. FULL - Deck width: 7. Still having a hard time with size, try our Skateboard Sizer. For additional info visit our Skateboard Decks Buying Guide.

They are designed for carving, sidewalk surfing and for the pure thrill of turning. They are not intended to replace your conventional trucks for the skatepark. Revenge trucks are too performance oriented for traditional transition-based skateboarding. The patented external locking mechanism allows for the tightest turns with no need for riser pads even with wheels up to 73mm, resulting in a full circle on a 47" board in less than 8 feet, all with no wheel bite!

Turning has never been easier. They are mountable with standard hardware along with two options for hole patterns, old school and new school. This is our newly designed bushing for Revenge Trucks. This bushing will work in all previous models of Revenge.