Can i paint my yamaha rhino

It goes without saying that the first step is to clean the plastic. Once this is done, sand the entire surface with grit sandpaper. After fenders have been in the sun and are subjected to the elements, they tend to get a really thin "crust" on them.

You need to remove the "crust" by sanding. After sanding, scrub all the plastic with Scuff Magic and a red scuff pad. This will help to remove any water soluble contaminants and also help to remove any contaminants that may have been ground into the plastic from Step 1. Sand again with grit to remove any spots or "crust" that you missed in Step 1. Clean the plastic with a Polyvance plastic cleaner. Spray a heavy wet coat; wait about 20 seconds for the solvents to disolve or emulsify any contaminants, then wipe with a clean paper towel.

Apply 2 heavy coats of Plastic Magic. Be sure to allow first coat to flash off before applying the second coat. Allow Plastic Magic to dry completely.

Now apply high-build waterborne primer surfacer. The high build will fill any sand scratches and sandblast pits. Allow the primer to dry completely before the next step. How do you wet sand? What grit paper?

Think I am gonna do this Wednesday. Mud Master. Chad, To wet sand get the finest sandpaper you can find. At least grit preferably grit.

Get you a bucket full of water,add a couple drops of soap and dip the sandpaper in it and let it soak up some of the water. Keep the paper and paint wet at all times. Clean with a degreaser and put on another coat. If you have the tools you can wet sand the last coat as well and buff it out with a buffer to a really nice finish. But do exactly what quad runner said!

Mud Maniac. I have seen Green's ride up close and it looks good! I could not believe how well the Fusion pain laid down on the plastic. I thought it was aftermarket plastic. I'm going to paint some flames on my Blue plastic like the design that Yamaha offers.

I got the paint today, now I just have to come up with some sort of design. What color? I painted some white on my blue hood. Not real impressed with the fusion paint. Maybe it will set up harder in a few days. Looks ok. For some reason I can not post pics anymore. My spam catcher won't allow the pop-ups. Have a picture on the underground site.

When i used fusion on my potato gun pvc plastic it took about 4 days to set up good the first few days it would come off if you rubbed it to hard or picked at it Fixing to go start pulling off plastic in a few minutes. I think im going to go to black with mine. It is currently green very faded. Mud Monster.

I used the fusion paint on my fenders foir my buggy, it didn. The fusion would scratch off real easy in the woods were the auto paint seems to be holding up Just my. Mud Bogger. Latest Posts. Where can i get stretched swingarm for a honda foreman? I cant see any threads.